The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG4040TF High Rejection Brackish Water elements feature a tape outer wrap and 28 mil feed spacers. This element is designed with male end connections.Element SpecificationsModelFlowActive AreaAvg. RejectionMin. RejectionPart NumberAG4040TM2,400 GPD85 ft299.5%99%30325143032513Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.Operating and Design ParametersMembrane: Thin Film Membrane (TFM®)Typical Operating Pressure: 200 psigMaximum Pressure: 450 psigMaximum Temperature: 122°FChlorine Tolerance: 1,000 ppm-hrs, dechlorination recommendedOptimum Rejection pH: 7.0 -7.5Operating pH Range: 4.0 - 11.0Cleaning pH Range: 2.0 - 11.5Maximum Pressure Drop: 10 psig (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU: <1Feed SDI: <3Typical Operating Flux: 10-20 GFD (15-35) L.H-1.M-2
IsoPure Water
